Linear Micro Actuators' linear servos are electric push rods with PWM electric adjustment, which can be directly connected to the receiver for control, that is, to control the positive and negative poles of the push rod power supply, thereby controlling the extension and retraction direction of the push rod movement. With PWM electric adjustment control: It can be controlled by connecting to the receiver, and the speed and direction of extension and retraction can be adjusted. Yellow is the signal line, red is connected to the positive pole, and black is connected to the negative pole. The 360-degree servo is controlled by PWM to control its rotation speed and direction. 500-1500us PWM controls its forward rotation. The smaller the value, the faster the rotation speed; 1500-2500us PWM controls its reverse rotation. The larger the value, the faster the rotation speed. 1500us PWM controls it to stop, and it can only rotate continuously, not position. KTD is 5V, with PWM electric adjustment, and no limit protector; KT2D is 7.4V, with PWM electric adjustment, and also with limit protector (dual port), which is universal for electric push rods. Note: Electric adjustment requires receiver control. PWM module parameters: Model: DM-ESC002, Voltage: 4.2-8.4V, Continuous current: 3A, Maximum current 4AWM, Range: 1000~2000US, PWM 1500us stop, Size: 20x17mn. Single board weight: 0.6g3EC. Output: None. Running direction: Bidirectional forward and reverse, PWM 1500us stop, Applicable motor: 24 brushed motors on the whole board, Compatible with well-known remote control systems such as Futaba.JRSANWA.Hitec, Application areas: Mechanical models, smart logistics, smart homes, medical equipment, industrial robots, automotive industry, sandbox models, lighting industry, etc.

http://www.cnkabasi.com/